cnc router job

[fastolds]

I need a roughly 12" X 12" Harley bar and shield cut out of wood. Anything I can stain is fine and from 1/2" to 1" will work. I will send a DXF or DWG file of what I need to those interested.

[MegaMoog]

E-Mail:lprinner@wshampshire.com

Let's see what ya got!

[mxtras]

Send it - sales at mxtras dot com.

Scott

[fastolds]

Here it is. It's about 12" X 14"

[kdoney]

The drawing doesn't seem to be symmetrical. The peak of the top line is about .15 to the right of the peak of the bottom. I would send another picture. The work wouldn't look right when it's finished.

[fastolds]

I will have to look at that.

[fastolds]

This file should be correct. I need a wood that will stain good. The edges need to look good stained also so plywood I don't think will work.

[woodbutcher]

Never mine about the file I got it to open in my cadcam software.

What autocad version is this? I get an incomplete or invalid drawing error when I try and open it. If you can email me at sales@americanprecisionrouting.com I would love to quote it for you.

[turmite]

fastolds how many you wanting? 1 or 100?

Mike

[fastolds]

Thank you for all the replies, I have 2 being cut. If all goes well I hope to get a small batch of these made. I will have to wait and see what the market is.

[BFcarbon]

Let me know what king of wood you need ???

Cut in 1/2 thick

I will be able to give you a quote

Thank'S a lot
Steeve
www.bfcarbon.com

[Donald]

fastolds,
I have a detailed eps file of the Bar and Shield.
I can machine it 2d or with Vcarve Wizard. I've machined a few out of wood and acrylic and have also etched them on aluminum and other soft metals. Let me know if you need another quote.

Don