RFQ For 3 Seperate Parts

[stang5197]

Attached are a couple of parts that I need to get quoted. I have a couple more, I am looking for a shop that is willing to make several different parts for us (approx. 7 to 8) different pieces at qtys. around 20 (except for the lifter studs).

The parts would be ordered in the following quantities :

Tensioner Plate 20 pcs.
Lifter Stud & Insert 80pcs (Insert & and Stud)
The top of the studs need to be case hardened (see print), however I will get you the exact hardness specs. later, hopefully I can get a quote in the mean time.
Tensioner Pulley 20pcs. (Please Quote the Anodizing Separate from the Machining

Thanks
Ken

[ErnieD]

Hi,

Where are you located? What format did you use to post the drawings?

ErnieD

[stang5197]

We are located in S.C.

The drawings are saved in AutoCad R12/DXF format. We used AutoCadd 2006 so if you need another Autocad format or a PDF version let me know.

Thanks

[tenex tool]

Are you still looking for a quote on this project? If so please email me. Thanks.

[BonaVenture]

Can you send out your DWGs in a ACAD 2004.You could send them
Direct. pbonaventure@hotmail.com

Originally Posted by stang5197 Attached are a couple of parts that I need to get quoted. I have a couple more, I am looking for a shop that is willing to make several different parts for us (approx. 7 to 8) different pieces at qtys. around 20 (except for the lifter studs). The parts would be ordered in the following quantities : Tensioner Plate 20 pcs. Lifter Stud & Insert 80pcs (Insert & and Stud) The top of the studs need to be case hardened (see print), however I will get you the exact hardness specs. later, hopefully I can get a quote in the mean time. Tensioner Pulley 20pcs. (Please Quote the Anodizing Separate from the Machining Thanks Ken

[dmealer]

Hello,
Can you send me a iges file? Send to dalen32@msn.com

Thanks,

[ecope]

STANG5197 check your email.

[tjones]

Your drawing are fine. I will send a quote ASAP.

[Steeda31505]

Are you still looking for a price quote? Please E-mail me at Steeda31505@yahoo.com I have a shop which is fully CNC Machining capable we also have in house coatings available. Thanks,
Chris Spencer