We are looking for a independent smaller vaccuum former.
We get requests for smaller jobs and need someone how can CNC usually basic molds and vaccum form small parts in the range for 12x12 by about 4 deep, ruffly.
This might be the right fit for start-up or independend hobby vacuum former.
Quantities range from 5 to about 1000
We need someone who can turn a project around quicking with good quality.
Currenty we need to manufacture some samples of a basic plastic part.
Need about 10 or so for samples for our customer. We would pay for these of corse. And if they like it potential orders from min 200 to about 1000.
If interested please respond directly to firstname.lastname@example.org