Oak Case

[jhwatts]

I am looking for a oak case similar to a end mill case. It doesn’t have to have a closable top but I prefer it did. It should have roughly 10 holes but not necessarily. A stained finish would be nice also. I would like to find a company to order them from or possibly some to make them for on a as needed basis.

[ViperTX]

Have you something more specific...like a pic, dimensions, do you want oak (red, white, quartersawn?) or oak veneer plywood, hinge type (material, finish)?

[jhwatts]

See the following link. Look at the professional dop set. I would like something similar to this. Wood color or even type as long as it is hard wood is not an issue. I do want it look good. A cover would be nice. The cover doesn’t necessarily have to be hinged it could just slip over the top. I may have a name engraved on top. The dop shank is .250 .

http://www.gravescompany.com/facet_acc.htm

[DCparts]

I can do one (or more) for you, hinged top or removable top no problem. I work with many types of domestic wood and imported exotic woods.

Jarrah - Australian hard wood

Ipe'

Purple Heart

and many more...