4 AXIS IS OK BUT 5 A PLUS

PLUS I HAVE 3 NEW GREATER ATLANTA MASTERCAM POISTIONS.. ALL 3 VARIE
BUT MUST BE HANDS ON MACHINIST-SETUP-MASTERCAM PROGRAMMING

PLUS A TH NEEDED IN SE GEORGIA. (SMALLER TOWN)

IN ADDITION TO ALL THE OTER S MASTERCAM FOLKS WE NEED
SW va, nc ETC RELO HELP ON MOST POISTIONS

ALSO NEED PERSON WITH GOOD TELPHONE SKILLS FOR TECH SUPPORT
WITH MASTERCAM RESELLER


Email resumes to bw(AT)cadcamrecruiters(DOT)com. Or mail to:bw(AT)cadcamrecruiters(DOT)com charlotte, NC 28210 USA. Bill 704 5411100



overview (all the below assume canidate is strong with mastercam)
only a couple are with small shops

SW VA mill/lathes setup and programming processing $60s
CT 5 axis a plus 4 axis a must full relo to 85k
SE VA programmer
SE VA programmer & "some setup"
SE GA mastercam programmer and hands on machinist 25 hr plus OT
ATLANTA northern suburbs programmer mills and lathes new co
FLA easter, central FL coast
NC cradle to grave , processing
NC programming posts a plus , admin
TN eastern Tn programming mills only
NC 5 axis 3d complex parts
NC Application engineer (machine tool vendor




CAD CAM Recruiters > Mechanical Engineering Jobs

704 541 1100