Need A Quote- RFQ - Lathe Work 5 different prints. 2000 - 2800 pieces total

[jpmf1001]

I need a quote on the attached files.

I would like the '1 inch spud' and the '4.5 inch grip extension' manufactured at the same shop so they have the same finish.

I would like the 'handle clamp 2' and the 'handle rod' manufactured at the same shop since both parts need to thread together.

Along with your quote I would like to know turn around time if you are awarded the job.
Please do not try to figure shipping costs in the quote. Lets keep it simple and I will pay for the shipping costs when the job is done.

I am hoping to have these in 2-3 weeks without having to pay extra for a rush job. If you have some openings I have some work for you.

Here are some more specifics on each item:
1) 1 inch spud
6061 aluminum
32 finish
Quote for 200, 300 and 400 pieces

2) 4.5 inch grip extension
6061 aluminum
32 finish
Quote for 100, 200 and 300 pieces

3) handle clamp 2
6061 aluminum
63 finish
Quote for 100, 200 and 300 pieces

4) handle rod
6061 aluminum
Extruded finish if fine as long as there ar no dings. If you want toturn it down from 1" material then a 125 finish is fine
Quote for 100, 200 and 300 pieces

5) button machine
White Delrin
The top dome is cosmetic and must have a good finish.
Quote for 1500 pieces

Please email me all quotes and questions. If you have some immediate questions you can leave oyour phone number and I will call you.

jpmf1001@gmail.com

thanks,
Walt