RFQ: Stainless Steel Parts

[MadFlava]

Please find in the attached zip file a couple of Autocad files for some parts I need. I intially need a pair of the side plates and one of the pad mounts. After getting a prototype and checking the fit, etc, I will probably need a small run of 20-40 sets of large side plates and same number of mounting pads. There is a small side plate design as well which I'd like to prototype out after doing the large side plate. I'll probably need the same number of pieces in a small production run.

I'd also like to get these done in short order if at all possible.

Anyone interested in quoting this job, please email me at Jay@Ext-N.Com.

EDIT I probably should have noted this but the pad mount, included in the zip file, will need to be made from aluminum. The side plates could also be done in aluminum but I'd prefer stainless.

Thanks

[Cold Fusion]

I'm interested in doing the side plates. What thickness Aluminum did you need them in?

[MadFlava]

Originally Posted by Cold Fusion I'm interested in doing the side plates. What thickness Aluminum did you need them in?

I guess we could try something around 2mm to start with. Can you also make the mounting pads? Im not opposed to doing the side plates in 3mm carbon fiber either but Id like to be able to get all the pieces from the same source so Im not hunting around for part B to make part A work.

[Cold Fusion]

I would prefer to just make the side plates. Since I have yet to buy a large precision vise, drilling the .260 holes poses a problem. The plates are a simple sheet job, so I can easily take care of that.

[MadFlava]

Thanks.. Ill keep this in mind. However, if we're going to turn this into a production run, Ill need all the parts so let me see what other quotes I get.

[CNCexcite]

I could do both the parts together. Dunno if I am late in responding, but if I'm not, let me know. I'd like to quote on the part. I'm assuming you need aluminum for both the parts...
My email: vivekjp20@yahoo.com
Thanks,
Viv