3 3D Models

[cloud chaser]

Hello,
I would like to see if anyone is interested in quoting 3 3d solid models.
They are for a scale model of a steam locomotive. I have attached a scan of the prototype
blueprint and some pictures. There are 3 dimensions which I have to have that might not correspond with the prototype drawing so I' ve attached a picture of my 2d autocad drawing.
if needed I can send a dxf file of my rough sketch. The 1.75 dimension from hole to hole is a final dimension as is the .75 thickness of the outer tread, however the 7.75 dia and the 1.0 thickness might change slightly. Also, I have more blueprints that I can scan and send that show a cross section for each wheel and tons of photos as well. The model would have to be a solid model for use with CAM software and compatible with Autocad 2007.


thank you

Harry Boivin

[Chrliev]

Are you looking for a 3D model of one wheel, each of the wheels separately, the wheel and link as an assembly, the under carriage or the entire locomotive...?

Would you be expecting a SolidWorks file, an IGES file, an STL file, a DXF or some other exchange format...?

Thanks,

Charlie Vetter
California

[mcphill]

Interested, e-mail me if you can provide some more details. mike@mcpii.com

[mcphill]

Interested, e-mail me if you can provide some more details. mike@mcpii.com

Here's a quick stab at one of them. Thicknesses were guessed, as I can edit them easily and just wanted to get something up there...

[dpryor]

Harry,

I see by your profile you are in Akron. So are we.
We would be interested in helping you out. Please email over the DXF file and I'll get you a quote.

[cloud chaser]

Already found someone to draw it up, thanks to everyone for replying. I didn't expect to find anyone. so thanks again



Harry