Need A Quote- Need CAD/CNC free lancer in Miami

[betch23]

I have a project where I need to mill some parts out of wood. The parts are roughly 36" L 6"W 4"H

I may, also, need some parts milled from carbon fiber block.

I need to find a 3D Cad designer to help me with designing the parts while tutoring me. I also need an individual or firm to mill the parts.

If you could please contact me through the site or directly rrbetcher at yahoo dot com.

Thank you

[Frantic Fab]

Hi, i am Garrett Gordon with Masterpiece Models. i am a 3D Designer and Machinist. i am not local however, we are based out of vancouver, Wa. please take a moment to look over some of our work at Masterpiece Models

we are fully capable of completing this project of yours. the only catch it the tutoring end of it. i can provide walkthoughs over the phone but it would all stem around the program you are using.

either way feel free to contact me and we can discuss further possibilities!

Thanks,
Garrett Gordon

Masterpiece Models
7907 ne St. johns rd.
Vancouver WA, 98665
(360)256-1488
"What Can We Build For You?"