Need A Quote- cnc routing

[adivito]

I have a fairly simple logo I need cut. Another member here has graciously offered to write the g-code for whatever machine will be used. I would ideally like to find someone in the chicagoland area if possible. The logo is going to be cut into foam sandwiched between plywood. If anyone can help me out with this or know someone who can I would greatly appreciate it.
Thanks

[Frantic Fab]

Masterpiece Models

I am Garrett Gordon, we currently have a large opening on our machine. i can create the g-code as well if necessary. if not the processor post is for a Precix 9100 4'x8'x8'' cnc router. we are based out of Vancouver/Portland Washington. we frequently ship all over the world and i am sure if the shipping cost is an issue we can resolve this no problem. if you are interested please visit our website and contact me at

garrett.gordon@masterpiecemodels.com

Masterpiece Models
7907 ne St. johns rd.
Vancouver WA, 98665
(360)256-1488
"What Can We Build For You?"

[n9nun1]

Originally Posted by adivito I have a fairly simple logo I need cut. Another member here has graciously offered to write the g-code for whatever machine will be used. I would ideally like to find someone in the chicagoland area if possible. The logo is going to be cut into foam sandwiched between plywood. If anyone can help me out with this or know someone who can I would greatly appreciate it. Thanks

Hello,

If you would like to send the file this way I would be happy to take a look at it. We're located north of you near Green Bay.

Thanks,

Mike