CNC programmer/operator in Tampa Bay area

[tokarevsvt]

The job canidate must have the
Ability to program/set-up and run CNC machines (Haas VF3 SS) (Mastercam)
Read/interpret drawings/prints
Ability to work within close tolerances while maintaining quality
Perform in process inspection using standard inspection equipment such as micrometers, calipers, indicators
Familiar with machining concepts, practices and procedures

US Citizen with no criminal history.
High School Diploma or G.E.D.
A verifiable track record of at least 5 years direct CNC machine shop experience.
Direct experience setting up and programming multi-axis, CNC vertical and horizontal machining and turning centers.
Computer skills including Word, Access and Excel is a plus

Please reply to tokarev@earthlink.net

[MBG]

The job canidate must have the
Ability to program/set-up and run CNC machines (Haas VF3 SS) (Mastercam)
Read/interpret drawings/prints
Ability to work within close tolerances while maintaining quality
Perform in process inspection using standard inspection equipment such as micrometers, calipers, indicators
Familiar with machining concepts, practices and procedures

US Citizen with no criminal history.
High School Diploma or G.E.D.
A verifiable track record of at least 5 years direct CNC machine shop experience.
Direct experience setting up and programming multi-axis, CNC vertical and horizontal machining and turning centers.
Computer skills including Word, Access and Excel is a plus

Please reply to tokarev@earthlink.net

Are you a headhunter or the actual company? I am from tampa.

[tokarevsvt]

No headhunting - Need someone to start asap .

[MBG]

Is it on the tampa or clearwater side of the bay area?

[tokarevsvt]

Safety Harbor

[tokarevsvt]

The job canidate must have the
Ability to program/set-up and run CNC machines (Haas VF3 SS) (Mastercam X5)
Read/interpret drawings/prints
Ability to work within close tolerances while maintaining quality
Perform in process inspection using standard inspection equipment such as micrometers, calipers, indicators
Familiar with machining concepts, practices and procedures

US Citizen with no criminal history.
High School Diploma or G.E.D.
A verifiable track record of at least 5 years direct CNC machine shop experience.
Direct experience setting up and programming multi-axis, CNC vertical machining centers.
Salary range $15.00 to $18.00 per hour

Please reply to tokarev@earthlink.net
727-726-2500
Located in Safety Harbor Florida

[MBG]

The job canidate must have the
Ability to program/set-up and run CNC machines (Haas VF3 SS) (Mastercam X5)
Read/interpret drawings/prints
Ability to work within close tolerances while maintaining quality
Perform in process inspection using standard inspection equipment such as micrometers, calipers, indicators
Familiar with machining concepts, practices and procedures

US Citizen with no criminal history.
High School Diploma or G.E.D.
A verifiable track record of at least 5 years direct CNC machine shop experience.
Direct experience setting up and programming multi-axis, CNC vertical machining centers.
Salary range $15.00 to $18.00 per hour

Please reply to tokarev@earthlink.net
727-726-2500
Located in Safety Harbor Florida

Not to be offensive but don't you think trying to find somebody that can program and set up for that pay range is going to be difficult?

The people I know who can set up and program and the people who program can't set up.

Although, I always know people who are looking to find new jobs. I will keep an eye out.

[sfweb]

Does it matter if someone have GED online diploma ?

The job canidate must have the
Ability to program/set-up and run CNC machines (Haas VF3 SS) (Mastercam)
Read/interpret drawings/prints
Ability to work within close tolerances while maintaining quality
Perform in process inspection using standard inspection equipment such as micrometers, calipers, indicators
Familiar with machining concepts, practices and procedures

US Citizen with no criminal history.
High School Diploma or G.E.D.
A verifiable track record of at least 5 years direct CNC machine shop experience.
Direct experience setting up and programming multi-axis, CNC vertical and horizontal machining and turning centers.
Computer skills including Word, Access and Excel is a plus

Please reply to tokarev@earthlink.net

[tokarevsvt]

If you tell me you know mastercam i will set you down in front of the PC and see what you really know. Same goes for the Haas Mill - so being able to do the work I need done is more important than a piece of paper.

[samhyto]

I have to agree with a previous poster.

You are only willing to pay $18.00 max for someone with the requirements specified....wow! Even with the economy as bad as some percieve, you would have to be powerball lucky to find a fully qualified candidate for less than $22.00/hr unless you have a highly lucrative benefits package.

If you have found someone......then "Xaxis" (the Greek God of Machining) has smiled down upon you favorably.

Sam

[speedtwin69]

I set up and run (2) VF3's where I work in a rural area and get $40.00 an hour.
Goo luck finding someone for that mere pay.

[chet470]

i believe that pay range to be an insult to anyone with those qualifications!