Need A Quote- 1-2000 Delrin parts

[yscott]

Please see attachement for quote. I need quotes for 1000 and 2000 pieces. Sorry for the hand drawing. I will send a sample to the bid winner.

[MILLMARK]

We're looking at it. Has anyone replied yet?

[yscott]

yes, one bid is in

[Dualkit]

I hope the person who replied told you that your 15 degree face angle cannot meet a sharp edge without burr issues. Either a flat needs to be designed into that area or each part will need hand deburred and you will end up with a radius there. Usually people bid away here with out asking relevant questions. If these were metal parts you could leave a sharp edge and tumble a radius on, but this is plastic, which you can't tumble,these will need attention by hand, driving the price up. Unfortunately most will overlook this and bid anyway.

[yscott]

Originally Posted by Dualkit I hope the person who replied told you that your 15 degree face angle cannot meet a sharp edge without burr issues. Either a flat needs to be designed into that area or each part will need hand deburred and you will end up with a radius there. Usually people bid away here with out asking relevant questions. If these were metal parts you could leave a sharp edge and tumble a radius on, but this is plastic, which you can't tumble,these will need attention by hand, driving the price up. Unfortunately most will overlook this and bid anyway.

I made a .020" flat on the prototype but, forgot to draw it. Thanks for the observation. Anyone bidding please keep this in mind.

[mactec54]

Dualkit

There is no problem if you needed to tumble the plastic part, Plastic parts tumble very well, You could machine this part without a burr, you just need to know how

[dstryr]

Quote sent

[miniz98]

http://www.ancoprecision.com

[Donkey Hotey]

Originally Posted by miniz98 $3.00 Ea for 1,000 $1.50 each for 2,000 Delivery 2 Weeks. Online Machine Shop | Anco Precision Inc. | Instant Quotes

$1.50 each for 2000 = $3,000
$3.00 each for 1000 = $3,000

Twice as many parts for exactly the same price? Man, I'm glad you don't do pricing for ME.

Do twice as many parts also take half as much time?

[miniz98]

Online Machine Shop | Anco Precision Inc. | Instant Quotes

[azmachining]

$1.78 for each at a quantity of 2000

$2.98 for each at a quantity of 1000

You like that dumb @$$, open bidding is stupid, don't do it!
No this is not a actual bid, to cheap for us, and I'm sure their workmanship shows it.

[rmorton]

Haven't been on in a while. We are machine shop specializing in plastics. Have you already purchased these parts?