Anodizing Special

[MBG]

I am running a special on anodizing parts.

CHEAP CHEAP CHEAP>

You set your price if you want hard coat anodize or clear coat anodize.

MBG Mfg.

[FranH]

We concentrate on replacement parts for the government and, as such, a paper trail and certification of all processes must be on file. Have you considered or are you able to do anodize etc with the gov't blessing?

[MBG]

Originally Posted by FranH We concentrate on replacement parts for the government and, as such, a paper trail and certification of all processes must be on file. Have you considered or are you able to do anodize etc with the gov't blessing?

pmed you.

What did you have in mind? How big are the parts?

[Kool Parts]

Might have something for you. Next couple of weeks we will be making 250 small alum parts (3x1.5x.75 thick) Would need black so we can put them back in the mill and engrave the company logo.
Gary

[MBG]

Originally Posted by Kool Parts Might have something for you. Next couple of weeks we will be making 250 small alum parts (3x1.5x.75 thick) Would need black so we can put them back in the mill and engrave the company logo. Gary

how many do you have? I can do that. I can hard coat them also and you can engrave in the hardcoat because it is a gray color. Send me a sample and I will gladly show you.

MBG

[MBG]

You set your price.

I will also throw in a FREE vibratory. (it smoothes out the tool parts and makes the part really smooth).

Tell me what you want anodized hard or clear.

[InspirationTool]

What colors can you do? I have some parts I would like in different colors so people can personalize thier tools. I'm especially interested in pink and purple.

-Jeff

[MBG]

Originally Posted by InspirationTool What colors can you do? I have some parts I would like in different colors so people can personalize thier tools. I'm especially interested in pink and purple. -Jeff

sorry can't do those exotic colors. Just hard coat (gray) and clear coat. and short runs of black and blue

[MBG]

no "hobby" anodizing. This is a professional equipment used. I use dyna power systems, I also clean the parts with special acids. Then I seal the part (close the pours) with a "hot seal". Where I regulate PH levels daily

[CNCadmin]

Can cast parts be anodized?

[MBG]

Originally Posted by CNCadmin Can cast parts be anodized?

yes, as long as it in aluminum. I have done forged parts before also.

[CNCadmin]

Originally Posted by MBG yes, as long as it in aluminum. I have done forged parts before also.

Check you're PM box.