Need A Quote- Single Run Custom Motorcycle Parts

[Grashopr]

Need a quote for the following part. This is one side, will need a mirrored facing side. Single run as prototype. Possible small runs within 60 days. 6061. Built in ISO.

OilTankSide2-2.DXF

Please submit Quotes to grashoprpaint@gmail.com

Thanks!

[houstonsamuel]

I looked at it, but I don't know how big or small this thing is. I need a dimension to scale it properly.

[Grashopr]

It's 200mm wide. The units are in ISO, so all measurements are in mm.

[snovak240]

emailed quote and questions. Let me now if you got it

[bostosh]

I made a heat sink for the electronics biz very similar to your design, I can model and make this part. no problems foreseen. PrivMsg if you still have the requirement. Thanks.

[Grashopr]

I've gotten a few bids that I am working from. Thanks for the inquiries. The design in the initial post was the preliminary design. I am including the final designs here in case anyone wants to put in any more bids. I will be closing bidding on Friday. Thanks for all the interest!

[snovak240]

The drawing scale shows this to be much smaller than the original design of 200mm. What are the sizes of the part, 1.5 scale on the drawing makes it less than 1/2 the size. thanks

[Grashopr]

On the right side, overall width is 255.11mm, Overall height is 190mm (front plane view)

[Khalid]

hi grashopr..your website is not opening