RFQ: 12/13 guage stainless disks, 2" diameter

[InspirationTool]

The part is a 2" diameter circle punched or cut from 12 or 13 guage stainless sheet.

Diameter, flatness and roundness accuracy is +/- .032".

Small ridges or nubs from a multi-stange punch operation are okay.

Part needs to be deburred enough to be safe to handle. Surface finish is unimportant, though it must be clean and have no mill scale.

Qty to quote: 100 and 200

Price ballpark I'm looking for: $1.50 - $2.50 each

ALSO, if you can do it without adding more than $1 a part, add a .110" min .120" max hole in the center.

Thanks!

-Jeff

[InspirationTool]

I forgot to specify, but thats 300 series stainless.

-Jeff

[InspirationTool]

Just FYI, I found the best price on mfgquote.com... My first quote with them was too specialized, and didn't get any responses... this one got a ton with some very good prices. It turns out laser cutting was the way to go on this.

Thanks all!

-Jeff

[larry53]

I would like to quote on this,e-mail me at nec2@infionline.net

[monk_egram]

I can do this easily with the hole for same price 1.50 each with a laser. Please e-mail me if the job is still open.
monk_egram@yahoo.com