Spur gears in Delrin

[scsi]

I need to make several Delrin/Acetal gears for a prototype and then the quantities will go to 50-100. Need quote for both - proto and production.

1. Larger gear is 64P 112T, face width 1.00", hubless, 1/4" bore
2. Smaller gear (pinion) is 64P 48T, face width 1.00", 3/8" bore

If 64P is not possible, I can go with a 48P pitch:
1. Larger gear will be 48P 84T, face width 1.00", hubless, 1/4" bore
2. Smaller gear is 48P 36T, face width 1.00", 3/8" bore

Thanks in advance!

[scsi]

Thanks for all who responded. Don't need quotes anymore. Is sounds like these gears won't be cost efficient and we will try rollers instead.

-scsi

[ahunter9624]

Thanks for all who responded. Don't need quotes anymore. Is sounds like these gears won't be cost efficient and we will try rollers instead.

-scsi

check out boston gear and atlanta drive systems. They make plastic gears and may be able to help