Aluminum Spacer Rings

[morerice]

I need 300 rings in aluminum or a hard plastic (which ever costs less). I need to have these complete within 2 weeks time to Maricopa, Arizona. Here are the dimensions:
2.260" OD
2.047" ID
0.590" Thick
Tolerance of +- 0.003"

Thanks,
Mo

[morerice]

The OD could be 2.25".

Mo

[Dualkit]

Edge breaks? Aluminum will be cheaper, is 6061 ok?

[morerice]

The OD of 2.250" does not have to have tight tolerances. It could be unfinished 2 1/4" tubing. My thinking is to use 1/8" wall tubing and machine the ID to 2.047" with a tolerance of +- 0.003". Deburring is not necessary (I can do this in house).

Yes, any aluminum will do, including 6061. I'm looking for low cost on these parts.

Mo

[clemmie21710]

Are you still looking for the parts described in the thread? Let me know so we can quote them for you. Thanks.
Dave Clem
CNC Programmer
Hal-Pro Inc, Rockville Md
301-762-1223 Attn: Bob King

[cro-magnum]

Is the bidding still open I live in Phx and could still make your 2 week dead line.

[aksalzaabi]

Hi Friends. is there any machining work in dubai, Uae. i have a company in dubai.

[gmfoster]

The OD of 2.250" does not have to have tight tolerances. It could be unfinished 2 1/4" tubing. My thinking is to use 1/8" wall tubing and machine the ID to 2.047" with a tolerance of +- 0.003". Deburring is not necessary (I can do this in house).

Yes, any aluminum will do, including 6061. I'm looking for low cost on these parts.

Mo

Then why did you spec it to .003 tolerance?
This is what kills so much time on estimates. When any one asks for a quote they need to ask for what they really want!

[DMB machine LLC]

Is the quote still open