Need a few parts machined to get my first DIY CNC machine up and running

[dallasengr]

I Need a few parts machined to get my first DIY CNC machine up and running. I have the parts mocked up in inventor and a few of them in AutoCAD. If anyone could help me please let me know. I need the parts milled from aluminum.

[GeorgeRace]

I can do 2.5d stuff up to 1/2 and inch thick. No larger than 25 X 14 inches.

Is there anything in your need list that would fit into that category?
George

[clemmie21710]

If you could send dwg or dxf files we can quote the parts for you. We have capability of up to 40 inches in the X axis in 20 inches in the Y axis of our largest CNC mill. We also have CNC lathe capability.Thank you for the time in advance.

Dave.
CNC programmer/ Machinist
Hal-Pro Inc.
Rockville Md.

[dallasengr]

Pretty much all of it would fit into that category. The parts I need are 7 plates at .375" thickness that just need some holes drilled at accurate locations. Then I have 5 other parts that should fit your specs. PM me with your email address and I can send you the inventor part files, unless some other format works better for you.