Need A Quote Repeat work - CNCzone.com-The Largest Machinist Community on the net!

millman52 · #1 07-09-2010, 03:41 PM

Please quote on quantities of (5), (10)

Major OD of part may remain torch cut as long as cut is smooth & clean.

Outside or flat face may remain unfinished as long as no pitting or rust is present.

All corners or holes must be free of burrs.

Bidding ends 12:00 NOON 07/16/2010

billynn413 · #2 07-14-2010, 09:29 AM

ill need better prints, $400 for 5 pieces, $750 for 10 pieces about 2weeks lead . thanks bill

Originally Posted by millman52

Please quote on quantities of (5), (10)

Major OD of part may remain torch cut as long as cut is smooth & clean.

Outside or flat face may remain unfinished as long as no pitting or rust is present.

All corners or holes must be free of burrs.

Bidding ends 12:00 NOON 07/16/2010

billynn413 · #3 07-14-2010, 01:05 PM

ill need to clarify some items on the print, but i can do 5 for$400, and 10 for$750 thanks bill

Originally Posted by millman52

Please quote on quantities of (5), (10)

Major OD of part may remain torch cut as long as cut is smooth & clean.

Outside or flat face may remain unfinished as long as no pitting or rust is present.

All corners or holes must be free of burrs.

Bidding ends 12:00 NOON 07/16/2010

snovak240 · #4 07-14-2010, 01:35 PM

PM Sent with pricing

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need A Quote- Small Part Repeat work	millman52	Employment Opportunity	19	11-05-2009 05:57 PM
Need Help!- Repeat	cshim	G-Code Programing	4	08-07-2008 07:49 AM
How Do I Repeat?	TZ250	Dolphin CADCAM	2	03-04-2008 05:11 AM
Repeat command on TL-1?	Haeusser	Haas Lathes	4	07-31-2007 05:31 PM
Need help on G75.1 pattern repeat	wayne mitchell	G-Code Programing	1	03-16-2005 02:49 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)