Need G-code file

[nowforge]

I am looking for someone to develop the G-code needed to vector cut slots in a polypropylene mold base. The part has been developed and the dxf drawings are ready. The slots are 12 mm deep and have a 6% tapered wall. They are organized in a radial configuration.

I look forward to discussing this project with interested parties

[mcphill]

I am looking for someone to develop the G-code needed to vector cut slots in a polypropylene mold base. The part has been developed and the dxf drawings are ready. The slots are 12 mm deep and have a 6% tapered wall. They are organized in a radial configuration.

I look forward to discussing this project with interested parties

I am interested. Please e-mail details to me at mike@mcpii.com

[Eagle Eye NC]

Please email the details to our organization or view our webpage. www.eagleeyenc.ca
or rsingh@eagleeyenc.ca