need a vendor/fabricator in the NY area.

[coralcrazed]

Hello,

I am working with 1" thick, 1/2" thick and 1/4" thick acrylic sheet that I need to have cut with a proper CNC machiene. The project will be made up of rectilinear pieces and components that must fit together acuratly. I have drawn it on AotoCad as well so its all layed out and can provide whatever drawing a machenist needs to plug into thier CNC computer. I would also like to purchase the acrylic from the same place as well. looking for Polycast cast acrylic sheet for the 1" and 1/2", the 1/4" can be less expensive grade. 1" will be clear, 1/2" will be black and 1/4" will be a combo of red and clear.

can you help me find a good CNC machienist in the NY area approx 1/2 hour north from NYC. I will also travel upto 1 hour from my westchester home. thanks so much for your help. also I will need about 50 or so pieces cut can you give me an idea how much I should be looking at for this type of project?

[universalfab]

A HUNDRED BILLION DOLLARS!!

[coralcrazed]

no one???

[zcases]

I am in Binghamton, which may be farther than you want to travel. But if you end up with nobody close feel free to contact me.

Scott

zcases@frontiernet.net