Small Run CNC Aluminum Parts

[m7king]

Personal Project need a quote for a prototype and small order run of 20 pieces of each design. Please include the cost of materials. I'm currently located in Los Angeles, CA. If you have any questions PM me or email m7king@gmail.com

Tolerance should be +/- 1.5mm , Finished callouts should be brushed aluminum.
Need a price for anodize clear, and anodize blue, and anodize black.

Thanks in advance!

[MrWild]

I think you could get cheaper quotes by opening up your unimportant tolerances. Some of them could be two place decimals giving you what you need. Even though the tolerances open up, CNCs will give you precision. .050R could be .05 etc. It does make a huge difference in quotes.

[m7king]

I think you could get cheaper quotes by opening up your unimportant tolerances. Some of them could be two place decimals giving you what you need. Even though the tolerances open up, CNCs will give you precision. .050R could be .05 etc. It does make a huge difference in quotes.

Thanks for the tip.

Tolerance should be +/- 1.5mm , Finished callouts should be brushed aluminum.

[M250cnc]

Thanks for the tip.

Tolerance should be +/- 1.5mm , Finished callouts should be brushed aluminum.

Phil

[dstryr]

You emailed and called me and then no word?

[m7king]

You emailed and called me and then no word?

Sorry for the late reply. I have sent you an email.

All emails and PM's have been replied. Keep them coming if you are interested.

Thanks!

[m7king]

I have been receiving great feedback. I am also interested in possibly Mold Injection of this Part as well. For those interested please contact me at m7king@gmail.com

[ajm11]

I would contact quickparts.com It sounds like they could help you. I have worked with them in the past and the service is great.

[m7king]

Thanks for all your suggestions and feedback.