aluminum turning RFQ


Results 1 to 1 of 1

Thread: aluminum turning RFQ

  1. #1
    Member
    Join Date
    Sep 2006
    Location
    USA
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default aluminum turning RFQ

    Quote these in lots of 12 and 24. The 1st order will be for 12. This may be a steady job for someone once i get things rolling. The material is 6061 Aluminum and you are to supply it. I forgot to include the surface finish on the drawing. all the bore finishes and OD are 125, the faces (only the ends of part) are 63.

    I have made these before on a Mazak lathe and it was pretty easy with regular steel boring bars if you get the speeds right. Its really not that hard to do because its just aluminum. These took me 10 minutes each

    send your quotes to Camarogod98@hotmail.com.... Please include delivery time once ordered

    Some of the text in the drawing ran together because it was drawn in mastercam and then converted over to dxf.

    Similar Threads:
    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

aluminum turning RFQ

aluminum turning RFQ