- Machinist Positions in Florida!
-
Registered
Machinist Positions in Florida!
I have 9 positions available within the aerospace industry, and I have both local and per diem rates, so please inquire no matter where you live!
- Employer is looking to roll this into a permanent position on/after 180 days.
- Main CNC machines used are 3, 4, and 5-axis lathes and mills made by Mazak, Okuma (V100 and V80)
- Specific machine type experience not required, but must have experience on something of similar size ie. Haas, FANUC, Makino, etc..
- Programming not required, but must be able to monitor and adjust spindle speed, cutting depth, adjust off-sets, setup tooling.
- Must also be familiar with Calipers, Swing Guages, Micromoters, Depth Guages, and other Precision Measuring Tools
Rate depends upon experience. Call or send in resume today for immediate consideration! 1-800-359-4787 x8536, or jennifer.piotroski@stsaerostaff.com
Sorry, STS does not sponsor work visas. Thank you for your time today!
Jenn
Similar Threads:
-
- Machinist Positions in Florida!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules