Emco VMC-100 / TM02 R-parameters?

[Viilari]

Anyone out there who could list the R parameters of their
VMC-100 with TM02 controller?

You can get those visible by hitting edit, reset,
writing "monitor", and pressing enter. Then write R00
and press enter. Each enter after this shows the
next parameter R01, R02,..,R49. Exit monitor mode by
pressing manual.

It would be perfect if two persons would list these
compensation values, so we could see if there is
much difference between machines.

Thanks!

[Loffy]

I have customized these values to get maximum strokes, no point in compairing them.

All these do are end limits, backlash and such.

[Viilari]

Originally Posted by Loffy I have customized these values to get maximum strokes, no point in compairing them. All these do are end limits, backlash and such.

No point, if you have any idea what they should be..

I lost the MSD totally and needed something to work on. When posting that question, I only had MSD from a different emco machine. It would have been interesting to see how much, for example, back-slash or position for tool change varies.. Oh well, people seem not to wish to publish the MSD. That's life.

[Loffy]

Attitude will get you nothing from me!