- Fusion 360 Post Processor, Emcotronic TM02
-
Registered
Fusion 360 Post Processor, Emcotronic TM02
Hi,
My first "real" post here!
I have become a happy new owner of a VMC-100. I have done manual programming for a few months now and want to try out CAD/CAM to speed up the process. As I'm a hobbyist I don't really run a lot of runs for each part and need new code quite often I want to speed up my process.
As Autodesk Fusion 360 is a combined CAD/CAM that is freely (as in beer) available package for students/hobbyists I think it is the best option for me and my trusty Emco.
To get from the CAM stage to the G-code we need a post processor. I have started to develop a post processor on my own but my experience in both CAM and G-Code is decimal at best. At any odds, if you wish to participate in private or in public I have started a thread on Autodesk's CAM-forum.
Emco Maier VMC-100 Postprocessor including initial try with small improvements
If you wish to remain private just PM me with ideas and/or suggestions.
Similar Threads:
Last edited by GastonSWE; 07-21-2015 at 07:18 PM.
Reason: Change of topic
-
- Fusion 360 Post Processor, Emcotronic TM02
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules