- Need Help!- Emco compact 5 PC stepper motor information
-
Registered
Emco compact 5 PC stepper motor information
Hello
Recently i bought 2 of these machine with good price.
the stepper was gone.
So anyone here know the Current (A) and Voltage (V) of the original emco stepper motor???
so i can replace it with the new one with the same spec.
After search on google, i got 2 manual from emco compact 5 PC and CNC.
step angle is 5 degree
Voltage 10 v (still confuse for me, in the manual mention about 40V too)
6 wire
Hope i got answer from this forum. I got none answer from yahoo group of cnc emco.
Best regards
Similar Threads:
-
-
Member
Re: Emco compact 5 PC stepper motor information
Hello
You can only find this motors on ebay, look for "emco cnc" and you find some used motors but look if the pulleys are still in place.
(Most people reuse the pulleys)
Best would be to change to an new control an use 1.8 degree motors with better resolution.
Dieter
- Need Help!- Emco compact 5 PC stepper motor information
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules