Newbie How to move the tailestock with M20/M21


Results 1 to 2 of 2

Thread: How to move the tailestock with M20/M21

  1. #1
    Member cnc_swe's Avatar
    Join Date
    Jan 2006
    Location
    sweden
    Posts
    121
    Downloads
    0
    Uploads
    0

    Default How to move the tailestock with M20/M21

    Hallo,
    I have an tailstock I can move manual with 2 buttons. But when I try to write some g-code I always get an error.
    My Emco Concept Turn 155 is an TCM machine and use 12 tools revolver and 6 was driven tool.
    I use C-axel but I can´t find right code to move the tailstock.

    I have try to write N10 G0 M21 Z75 etc.

    The instructions book.
    Unfortunately, it says nothing about how to deal with tailstock.

    Do you now any thing about this, please tell me.

    Similar Threads:
    Last edited by cnc_swe; 02-28-2017 at 01:54 AM. Reason: wrong spelling


  2. #2

    Default Re: How to move the tailestock with M20/M21

    What is the error? M21, chuck must be clamped, and the tailstock prox must be set according to manual. If prox is not set it, will give error about sleeve position, check your pm.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to move the tailestock with M20/M21

How to move the tailestock with M20/M21