Lathe Chuck Jaws


Results 1 to 6 of 6

Thread: Lathe Chuck Jaws

  1. #1
    Member
    Join Date
    Oct 2010
    Location
    USA
    Posts
    670
    Downloads
    0
    Uploads
    0

    Default Lathe Chuck Jaws

    Anyone know where I can get replacement jaws for my PC Turn 105? It has a Rohn ZGH - 82 chuck on it.

    Thanks,
    Awall

    Similar Threads:
    Awall - The Body Armor Dude
    CoolCNCStuff_ on Instagram - CoolCNCStuff.com


  2. #2
    Member
    Join Date
    Oct 2010
    Location
    USA
    Posts
    670
    Downloads
    0
    Uploads
    0

    Default Re: Lathe Chuck Jaws

    After much research today I think I may have to go with a non-Emco/Rohn lathe chuck.... any ideas from someone who's changed?

    Awall - The Body Armor Dude
    CoolCNCStuff_ on Instagram - CoolCNCStuff.com


  3. #3
    Member
    Join Date
    Oct 2010
    Location
    USA
    Posts
    670
    Downloads
    0
    Uploads
    0

    Default Re: Lathe Chuck Jaws

    Not sure if these will work. Trying to figure out how they mount.....

    3 Jaws, 3 Inch Diameter, Self Centering 76785013 - MSC

    https://www.mscdirect.com/product/details/08550030

    Awall - The Body Armor Dude
    CoolCNCStuff_ on Instagram - CoolCNCStuff.com


  4. #4

    Default Re: Lathe Chuck Jaws

    What's wrong with the jaws? Contact Emco for spare parts for the chuck. Be sure to be sitting down. There are no chucks other than OEM that fit the spindle and mount. Any other chuck requires an adapter flange. You'll need a front mount chuck.



  5. #5
    Member
    Join Date
    Oct 2010
    Location
    USA
    Posts
    670
    Downloads
    0
    Uploads
    0

    Default Re: Lathe Chuck Jaws

    The only jaws I have are soft jaws and they were poorly machined for 1/2" stock. I need the inner/outer stepped type jaws that are hardened. Emco does not sell the hardened jaws, only way to get that from them is to buy the whole chuck. However, they do sell the soft jaws. right now I cannot grab anything smaller than 1/2" in my chuck.

    Awall - The Body Armor Dude
    CoolCNCStuff_ on Instagram - CoolCNCStuff.com


  6. #6
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: Lathe Chuck Jaws

    Quote Originally Posted by smokediver576 View Post
    The only jaws I have are soft jaws and they were poorly machined for 1/2" stock. I need the inner/outer stepped type jaws that are hardened. Emco does not sell the hardened jaws, only way to get that from them is to buy the whole chuck. However, they do sell the soft jaws. right now I cannot grab anything smaller than 1/2" in my chuck.
    Look at Bison Chucks they made chucks for these machines, other than a new Rohn there are not many choices, what you were looking at won't fit, you need through bolts for the mounting

    Mactec54


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Lathe Chuck Jaws

Lathe Chuck Jaws