I had the same thing with the mill. I don't quite remember the issue anymore, but it was either:
1. % at the end was not required
2. a random space in the post the machine wasn't happy with
Well team, it's me again......
I've been trying to get Fusion360 to post a file that my WinNC Fanuc 21T can read but keep getting errors. I can go into Fanuc and manually write some code that shows the system can run. However, no matter what I write from Fusion or Gwizard I get an error on NC Start.
Can someone please post me a test face/turn code for a 1/2" stock. I'm really starting to get frustrated but I also know this is because I know virtually nothing about hand coding.....
It's calling out: Alarm 2600 - End of program without M30 (FYI, I've looked everywhere and I cannot find Alarm 2600 mentioned anywhere)
I've checked and the M30 command is there. I've manually gone in and edited the file and still, no luck......
Code below (simple face on 1/2" stock with Tool 3):
O0010
N10 G98 G18
N11 G20
N12 G50 S3000
N13 G28 U0.
(FACE2)
N14 T0303
(EMCO TOOL 3)
N15 G54
N16 G98
N17 G97 S1000 M3
N18 G0 X0.5 Z0.1969
N19 G0 Z0.0566
N20 G1 X0.6131 F39.3701
N21 X0.5 Z0.
N22 X-0.0625
N23 X0.0506 Z0.0566
N24 G0 X0.5
N25 Z0.1969
N26 G28 U0. W0.
N27 M30
%
Similar Threads:
Awall - The Body Armor Dude
CoolCNCStuff_ on Instagram - CoolCNCStuff.com
I had the same thing with the mill. I don't quite remember the issue anymore, but it was either:
1. % at the end was not required
2. a random space in the post the machine wasn't happy with