- New Machine Build- EMCO PC 105 PathPilot, iBOB2, Gizmosphere1, AC Servo Refit
-
Member
EMCO PC 105 PathPilot, iBOB2, Gizmosphere1, AC Servo Refit
I have been working on a PathPilot AC servo refit for Smokediver's Emco PC 105 lathe.
Configuration, iBOB2, AMD Gizmosphere1, PathPilot, Yaskawa 400W AC Servos, 6i25 - 7i77, +-10V analog control.
Here are a few pictures. The 10" touch screen will not be part of the refit, only for testing touchscreen interface.
I modified the Mitsubishi servo and motor power cables with new connectors for the Yaskawa servos.
Iron-Man
Similar Threads:
-
-
Member
Re: EMCO PC 105 PathPilot, iBOB2, Gizmosphere1, AC Servo Refit
EMCO PC 105 AC servo upgrade with Yaskawa 400W servo motors.
Control is +- 10V industrial standard using iBOB2 + AMD Gizmosphere 1.
An Allen Bradley VFD + SEW Eurodrive motor will be used to modify and test hal/ini files for the EMCO spindle motor.
Iron-Man
- New Machine Build- EMCO PC 105 PathPilot, iBOB2, Gizmosphere1, AC Servo Refit
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules