Manuals for Fanuc Tape cut Model WO wirecut edm machine

[rai]

I have a Fanuc Tape cut Model WO wirecut edm machine, I looking for it's manuals. Somebody provide me the manuals for the same.

[gabedrummin]

fanuc america sells them for 50.00 us....just give them a call.....i just got a manual for O WIRE .....it has a om control as dose yours.....what do you want to know

[rai]

Originally Posted by gabedrummin fanuc america sells them for 50.00 us....just give them a call.....i just got a manual for O WIRE .....it has a om control as dose yours.....what do you want to know

Thank you very much for your prompt reply. I wanted it's manuals for trouble shooting, Parameters, programming, etc. I have annoyed by it's alarms like overtravel, ref. problem, etc. It is very difficult without it's manuals to overcome it's problems. Kindly send me it's manual in soft form and I am ready to bear it's charges for the same.

[rai]

kindly send me it pdf copy, as I am suffering from it's alarms.

[gabedrummin]

Send me a copy of your parameters and I will look to see if you have problems with them............!....gabedrummin@yahoo.com

[Oksimoron]

I have a Fanuc tape cut w2 machine , I would be very thankful if anyone could give me a link, adress or phone number that I could contact for a manual.

p.s. I would also like to know which program could I use to convert my CAD drawings into a CNC code for the machine!

Thank you

[DIDAS MLENGU]

I am looking for the mannual for fanuc wire cut type WO could someone help me to source