| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| EDM Machines Discuss EDM Machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-02-2011, 02:14 PM
| |||
| |||
Fanuc ROBOCUT Alpha-1B will not power on the control. At first I could not turn the control off using the off button. Instead I used the main power switch to turn it off. Now the control will not power on. You can't even hear that click from the relay. Since I don't have the service manual I don't even know which relay it is? I do have 18V at the on switch. All fans are running and you can see that the drives and the control all have power. Pendent displays "ROM CHECK OK". Any help will be greatly appreciated. Last edited by TRG; 07-03-2011 at 09:03 AM.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- Fanuc Robocut α-1iA 18iW Problem | Danijel | Fanuc | 0 | 02-17-2011 09:52 AM |
| Fanuc Robocut U-V Urgent help needed !! | George123 | Fanuc | 0 | 02-16-2011 10:00 AM |
| Need Help!- Help needed with FANUC Robocut Alpha-OiA and the controller is a series 18i-W. | mrbernardjhahn | Fanuc | 2 | 01-14-2011 01:51 AM |
| EDM Programming Basics - Fanuc Robocut | BlueChip | EDM Machines | 0 | 02-23-2010 02:42 PM |
| FANUC robocut - user points ? | WEDDLETON | EDM Machines | 0 | 03-03-2009 07:34 PM |
| | |
Linear Mode
