reference lose in Fanuc 0m-a edm - CNCzone.com-The Largest Machinist Community on the net!

06-12-2011, 01:36 AM

aidinjoon

Join Date: Aug 2010

Location: other

Posts: 4

reference lose in Fanuc 0m-a edm

permalink

Hi
I have a Fanuc tape cut mate with 0M model A control, when I turn off the machine, the reference point is lost and must be re-referenced.
also in memory mode the start point return don't work and alarm 64(retracing error) appears but in jog mode it work.

My machine parameter once lost and I think some parameter maybe set wrong?
How can I fix the problem?

Sorry for my poor English

thanks.

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fanuc Zero Reference Return Problems?	grege101	Fanuc	19	02-12-2012 07:38 AM
Fanuc 3M need reference home parameter	teal854t	Fanuc	7	02-07-2009 01:32 PM
fanuc 18m g30 reference position	jlong58	Fanuc	4	01-31-2008 09:09 AM
Fanuc 0M Reference Position	inthezone	Fanuc	7	07-26-2007 01:28 PM
Fanuc 11M controls reference zero	liston336	Fanuc	2	04-06-2007 05:14 PM

All times are GMT -5. The time now is 04:28 AM.