| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| EDM Machines Discuss EDM Machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
 
11-17-2010, 04:46 AM
| |||
| |||
| My Sodick as well as other EDM machines that I have encountered don't like to have the wire in contact with the work when the juice is turned on; try backing the wire off a bit.  |
|
#3
11-22-2010, 11:40 PM
| |||
| |||
| like mark says you need to make sure that the wire isnt touching the part. Make sure your DI levels are good. Hold the calibrate toggle and adjust the needle to 0 with the dial above the calibrate toggle. If it is 5-10 on the scales you should be good. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| sodick bw 275 re-boot & locked keyboard problem | john.f | EDM Machines | 0 | 10-16-2010 12:08 PM |
| puma 280L alarm? | the lathe guy | Daewoo/Doosan | 3 | 07-22-2010 02:30 PM |
| Old Sodick 450, 600, 800 MC | Leha_Blin | General CNC (Mill and Lathe) Control Software (NC) | 1 | 02-14-2010 10:39 AM |
| Mazak QT 300-48" vs Puma 280L-44" | pjr170 | Daewoo/Doosan | 1 | 10-22-2008 02:23 PM |
| Sodick EDM machine Model A7C with MARK XI Control - Start up problem | rajappa | EDM Machines | 9 | 07-20-2008 10:08 PM |
| | |
Linear Mode
