| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| EDM Machines Discuss EDM Machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-21-2010, 11:55 AM
| |||
| |||
Hi, First time posting on the CNCzone. I am a student at the local community college. One of my classes I am taking now is a Wire EDM class. We had an assignment to write a program to cut a v-block shape out of a 1/4" piece of steel. In my program I included a G48 for Automatic Corner. The program ran fine until the first corner that cut in the counterclockwise direction. When it got to that point the machine kept cutting but stopped moving and would just sit there. The only way to get the program to run all the way through was to remove the G48 (G49). The machine is a AccuteX Wire EDM. Thanks in advance for any help or comments. Let me know if you need more info to help me. Thanks again.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Okuma GA-34N automatic program problem | ceilingwalker | Okuma | 17 | 06-01-2010 08:51 PM |
| 5 wire unipolar problem | jimm316 | Stepper Motors and Drives | 7 | 11-30-2008 11:12 PM |
| G76 Automatic Corner Rounding | Moparmatty | Okuma | 3 | 03-18-2008 04:14 PM |
| DX-32 automatic corner overide ? | RedGTZ | Bridgeport and Hardinge Mills | 3 | 12-29-2006 10:06 AM |
| Mits FX2 Wire EDM Problem. | weblogictech | CNC Plasma and Waterjet Machines | 1 | 12-16-2006 12:28 AM |
| | |
Linear Mode
