| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| EDM Machines Discuss EDM Machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-28-2010, 09:38 AM
| |||
| |||
I am trying to track down an intermitant short in the wiring on my Roboform 400. Anybody have schematics for the thing. If you tap on a relay on the board in the machine it comes back for a second then goes out again. Gives you an error like Collision or will not move in manual with out the sense turned off. Thanks in advance I need this back up and running quickly. Please contact today or tonight. Thanks again. Jetski
__________________ Jetski (alias Tooling and Engineering Czar) "I may not have the keys to success.. but I have learned to pick the locks"  |
|
#2
10-18-2010, 07:22 PM
| |||
| |||
| My machine has pms. It is working fine today. But not worth a hoot for a week. Had a tech in and we were convinced it is the batt. that helped for 3 days and back to no hoot. Any schematics, or suggestions would be greatly appriciated.
__________________ Jetski (alias Tooling and Engineering Czar) "I may not have the keys to success.. but I have learned to pick the locks" |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Roboform 400 | bocko912 | EDM Machines | 1 | 11-09-2009 06:43 PM |
| replace CRT on charmille roboform 20 | shazam/TPP | EDM Machines | 11 | 08-24-2009 11:40 PM |
| just bought a roboform 400 with c axis | jetski | EDM Machines | 0 | 03-28-2009 03:40 PM |
| Roboform 35 Software | Wilsonville | EDM Machines | 1 | 08-02-2008 08:36 AM |
| Charmille Roboform 200 | ErnieD | Moldmaking | 0 | 04-10-2007 08:46 PM |
| | |
Linear Mode
