Need Help!- EdgeCAM V12 hesitation & license issues

[frustuser]

Anyone having freezing issues with V12? I am constantly fighting with hesitation and "No Network Detected" errors. I am using a network license and am having no other apparent network issues. Any help would be appreciated.

[Haeusser]

v12 is very buggy, alot of things they still need to work out. Our office reverted back to 11 until the new release comes out.

[frustuser]

Haeusser, thanks for your reply. Just received V12.5 in the mail today. Think that I am going to try loading that and hope for the best.

If anyone has V12.5 loaded, please let me know if they have worked out the kinks. Thanks in advance.

[timf]

i have been having trouble with verify locking everything up when it is finished.
total black screen after part is done

the programs i'm using are very large and have projected tool path but my computer should not be the problem so i think it is a glitch.

don't have 12.5 yet we'll see when it gets here.

did have a network dropping issue on one computer but only one station, i think that may be a network wire connection issue.

[frustuser]

Thanks to everyone for their replies.

Just gt 12.5 installed and haven't noticed much of a difference. The errors and freezing are still there, but they look different.

Going to try a different network connection to see if that helps some if my issues. I will post when I find out more.

[helix77]

I USED V12 ALL THIS LAST YEAR WITH NO ISSUES.... NOW I WENT TO V12.5.. AND IT WORKS LIKE S**T.... VERIFY IS DOING ALL KINDS OF WEIRD STUFF... AND IT ALSO FREEZES UP MY WHOLE SYSTEM... MY COMPUTER RESTARTS ITSELF!!... I THINK IT MAY HAVE SOMETHING TO DO WITH THE AUTOSAVE.....BE CAREFUL!!