Problem EdgeCam post testing


Results 1 to 3 of 3

Thread: EdgeCam post testing

  1. #1
    Registered
    Join Date
    Mar 2010
    Location
    Australia
    Posts
    54
    Downloads
    0
    Uploads
    0

    Default EdgeCam post testing

    Hi all
    Just wondering if there is a way to step though a code wizard post line by line to error trap and check functionality.

    Cheers
    scurr

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2003
    Location
    usa
    Posts
    127
    Downloads
    0
    Uploads
    0

    Default Re: EdgeCam post testing

    have you used the code trace option?
    in code wizard, under "NC style,G-codes" there is a "debug" tab, in that check "generate code constructor trace" box and compile the generator. when you code a program this will label each instruction with the area of the generator that creates the code for that line.



  3. #3
    Registered
    Join Date
    Mar 2010
    Location
    Australia
    Posts
    54
    Downloads
    0
    Uploads
    0

    Default Re: EdgeCam post testing

    Thanks that work a bunch. Now just have to work out the rest of the coding.

    Cheers
    Scurr



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

EdgeCam post testing

EdgeCam post testing