HELP post processor needed for Edgecam DMC 63V


Results 1 to 1 of 1

Thread: HELP post processor needed for Edgecam DMC 63V

  1. #1
    BENEZZZ's Avatar
    Join Date
    Jun 2017
    Location
    Esztergom
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default HELP post processor needed for Edgecam DMC 63V

    HELP!!! post processor needed for
    DECKEL MAHO DMC 63v (2004 vintage)
    Heidenhain iTNC530
    Edgecam 2016-2017
    Thanks for the help.



  2. #2
    Member
    Join Date
    Oct 2003
    Location
    usa
    Posts
    127
    Downloads
    0
    Uploads
    0

    Default Re: HELP post processor needed for Edgecam DMC 63V

    have you tried to write one yourself?
    the code wizard makes it fairly easy, i have written them for machines ranging from a 2d laser to 5 axis.
    if you know what the results you desire should look like (ie. you can write gcode by hand) the tools in the code wizard walk you through everything.
    the code trace generator in the debug section will show you where the code in each line comes from to change what you dont like.
    i always wonder if people wanting posts ever even tried



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

HELP post processor needed for Edgecam DMC 63V

HELP post processor needed for Edgecam DMC 63V