Need Help! EdgeCAM 2017 R1


Results 1 to 4 of 4

Thread: EdgeCAM 2017 R1

  1. #1
    Registered
    Join Date
    Jun 2009
    Location
    EGYPT
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default EdgeCAM 2017 R1

    I can't find the info icon on setup after switch to manufacturing mode, although it was found in Edgecam 2016 R2.

    Any ideas

    Similar Threads:
    Attached Thumbnails Attached Thumbnails EdgeCAM 2017 R1-2-jpg   EdgeCAM 2017 R1-1-jpg  
    Last edited by Xecus; 04-21-2017 at 02:26 PM.


  2. #2
    Registered
    Join Date
    Oct 2003
    Location
    usa
    Posts
    119
    Downloads
    0
    Uploads
    0

    Default Re: EdgeCAM 2017 R1

    you dont have to "switch" like before.
    select your machine by clicking "create sequence" then select the "machining" tab above that, select your tool and roll.

    the tabs "setup-features-machining-NC code" are the toggles you are thinking of and they are more fluid now instead of on/off like it use to be



  3. #3
    Registered
    Join Date
    Jun 2009
    Location
    EGYPT
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: EdgeCAM 2017 R1

    Quote Originally Posted by timf View Post
    you dont have to "switch" like before.
    select your machine by clicking "create sequence" then select the "machining" tab above that, select your tool and roll.

    the tabs "setup-features-machining-NC code" are the toggles you are thinking of and they are more fluid now instead of on/off like it use to be
    your powerful note is like the magic key that make the info icon still available.

    and that works on the new files but not applicable for old ones. is there any recommendations to make info icon appear on the old files?



  4. #4
    Registered Vegabond's Avatar
    Join Date
    Dec 2008
    Location
    Norway
    Posts
    396
    Downloads
    0
    Uploads
    0

    Default Re: EdgeCAM 2017 R1

    But cant you just open the old files and do programming?

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

EdgeCAM 2017 R1
EdgeCAM 2017 R1