Mastercam v Edgecam

[Splint]

Out of curiosity, I've noticed that on the Edgecam web page there is only pictures of 5 axis operation using a trunion table. Can Edgecam make 5 axis paths for routers with nutating heads?

Splint

[Peter Eigler]

Hi Splint

yes, toolpaths can be output to head/head configuration machines. Machine simulation is available for most 5 axis configurations as well, with each release adding more functionality. Vericut is big $ but a great way to verify your G-code.

[Josu]

Hi guys

You can find de CL-Data file, after generate the toolpaths (of course) in:
EdgeCAM -->View--> Verify Machine-->Input File

Josu