Need Help! How to add machine-solid to postprocessor?


Results 1 to 8 of 8

Thread: How to add machine-solid to postprocessor?

  1. #1
    Registered
    Join Date
    Mar 2014
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default How to add machine-solid to postprocessor?

    hi guys,

    anyone here knows how to add a machine solid to a postprocessor?

    i already know how to add fixtrures ect. but i have to add the machine now...that must be done into the code wizzard i think?!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2008
    Location
    uk
    Posts
    125
    Downloads
    0
    Uploads
    0

    Default Re: How to add machine-solid to postprocessor?

    Personally I would import your solid model into Edgecam and orientate it around CPL TOP. Then simply select the solid you want to export, and right click and navigate down to 'output model'.
    Then in Code Wizard, just go to the machine setup tab, go to the correct place in the tree and right-click to paste model.



  3. #3
    Registered
    Join Date
    Mar 2014
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: How to add machine-solid to postprocessor?

    i will try that :-) thanks a lot!



  4. #4
    Registered
    Join Date
    Mar 2013
    Location
    poland
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: How to add machine-solid to postprocessor?

    Skyline, you have postprocesor for heidenhain itnc530 for five axis? please read yours PMs, thanks!



  5. #5
    Registered
    Join Date
    Mar 2014
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: How to add machine-solid to postprocessor?

    sorry mrciopek...i have been off for a few days!
    i have something for you ;-) read pm...



  6. #6
    Registered
    Join Date
    Sep 2014
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: How to add machine-solid to postprocessor?

    Skyline
    please can you send me a edgecam postprocessor for heidenhain 5 axis?

    thanks in advance



  7. #7
    Registered Miktauro's Avatar
    Join Date
    Feb 2015
    Location
    Italy
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    I read your post. Thanks a lot was very useful.
    If you need are at your disposal.



  8. #8
    Registered anton1308's Avatar
    Join Date
    Feb 2015
    Location
    Tyumen Region
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default





Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to add machine-solid to postprocessor?

How to add machine-solid to postprocessor?