post processor for mach 3?

[njitnjau]

I have seen it and i want to use it. Does anyone have a ready post processor for Mach 2/3 so i can do code for my machine? I dont know how i shall use the wizard and what template i shall base it on.

Similar Threads:

• Need Help!- Mach 3 Post Processor goes where????
• Post Processor for Mach 3????
• Problem- re post processor v21 mach 3
• VM 3.0 Post Processor for Mach 3 OR 2

[cncwalle]

Any success with this? I use edgecam code in mach3 now with some manual editing but it would be nice to generate Mach3 code directly.

any hints are welcome
kind regs

[Mike Mattera]

Can you send up some code examples? I dont know anything about the Mach2/3. If it's G-Code you should be able to use the Wizard to get it right pretty quickly.

Mike Mattera

[smoregrava]

Hi I have this. It's a post for Mach2 and I think I will work with mach3 also. I wrote this one to a friend so I belive It is some bugs there maybe. But in the you have all the files so you can modify the post your self. I take no responsibility for problems regarding this post. Unzip the file and copy the files to the c:/programfiles/edgecam/machdef folder.

If anyone have edgecam post for deckel I in very interested.

[cncwalle]

Works fine with mach3 ( with the stuff i tested so far...) Tnx alot.
kind regs

[smoregrava]

I think there could be a bug that can give a strange z move in the beginning. Or maybe I have fixed that. If you find any problems tell me and I can try to fix it.

[ali97]

i have tried this file with Edgecam...and i am getting this error msg:
"R i j k words all missing for arcLine 116"
in mach3

what seems to be the problem?...can any1 help me?

[smoregrava]

If you could upload the edgecam file the NC code and maybe you know wich line it stopped at. Then I can fiks this I belie. I made the post for Mach2 so I belive I can modify this.

I belive that this is a bug with arcs. But probably it only appears somethimes. Because this is not a message you get always or what?

[ali97]

Thanks for your quick reply...

I think i did something wrong with the original files...(dont know what)...
but, then, i recopied your files from the zip file and then did it again and it was working just fine...

i am really sorry for this....

Thanks again for you help.

[mungaro]

ali97 or anybody

Hello, !! I am looking for a post for cutting arcs on my lathe for Mach3. I just want to cut simple things to start. I am learning mach3 and not very good at g coding.

Cn anybody help?

mungaro

[labuda]

Have you resolved this issue? I'm having the same problem
thanks

[eranglr]

I have a homemade cnc milling machine.

I am looking for a way to generate gcode from Edgecam to mach3,
Does anyone managed to do so?

Thanks you!

[MegaMoog]

Attached is a file that I use with Mach 3 & Edgcam 2010 R2 on my 3 axis table top Shark router.
As with any post use this at your own risk.
Put this in your machdef folder and compile with code wizard.

MM

[Vegabond]

Is there a updatet post for Edgecam here? I also get the same problem with IJK i arc movements...
Thanks.

-Robert

[Andrzej2000]

Hi,
Does anyone have postprocessor for mach3 for 4th axis?

[Shelby5041]

for whatever reason the file wont open in code wizard
does anyoje have a valid post processor for mach3 for edgecam?