How do i fix this problem with the postprocessor?

[Vegabond]

When i click ok in "thread milling operation" i get a error on my postprocessor.

What can i do to fix it?


Greetings from Robert.

[goosehunter]

We had the very same problem here, answer we got from edge cam was that our post is not "adaptive". But for a small $2000 fee they would convert it to an adaptive post for us... We use the SECO Carboloy thread milling wizard. If you have more than one hole to thread mill, simply use a drill cycle to get your positional locations, edit the G81 line, and use the Carboloy program in incremental as a sub program to machine the threads. If you only have one thread, the Carboloy program will work..It is a free download, simply visit there website and go from there.


Hope this helps.

[smiley__24]

Originally Posted by goosehunter But for a small $2000 fee they would convert it to an adaptive post for us...

Mate, you should have that included in you maintenance. They may need a bit of a push but if it's one they supplied you with they should be maintaining it. If not they should be able to get hold of a non graphical post that you can adapt yourself, free of charge.