| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| EdgeCam Discuss EdgeCam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-29-2010, 09:40 AM
| |||
| |||
Hi All, I did a program for a die application using Edgecam roughing after some particular blocks am getting an error "Error in end point of circle" can any help me to fix this problem.Kindly find the following program were i got error. Program N27265 G0 Z15 N27266 X-101.696 Y28.809 N27267 G1 Z-31.9 F650 N27268 G2 X-106.986 Y18.097 I0.951 J-7.132 TURN=1 Z-37.2 F2000 N27269 I6.241 J3.58 N27270 G1 X-107.584 Y19.874 N27271 X-107.456 Y21.744 N27272 X-106.622 Y23.423 N27273 X-105.209 Y24.655 N27274 X-103.433 Y25.253  |
|
#2
11-29-2010, 10:03 AM
| |||
| |||
| Looking at the code it seems you're moving to position, feeding in to Z-31.9 and then doing a helix to z-37.2. Firstly, do you mean to helix in? You might not get the error if you change the approach type to ramp in, on the roughing cycle. Secondly the code looks like an Siemens so is this the correct format for your machine doing a 3d arc? |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| find center point of circle | Farzaneh_2010 | G-Code Programing | 14 | 10-10-2010 02:34 AM |
| Division of a circle error | millminer | Mechanical Calculations/Engineering Design | 6 | 07-25-2010 02:23 AM |
| Need Help!- Use a point for the start point of a profile. | dcskid | BobCad-Cam | 2 | 03-18-2009 10:31 AM |
| Arc end point error | HuFlungDung | CamSoft Products | 3 | 10-22-2008 10:10 AM |
| Formulas for arc tangent to circle with known end point. | mrk | Coding | 1 | 02-04-2007 08:33 AM |
| | |
Error in end point of circle. 
Linear Mode
