G43 line after tool changes issue.

[Ecmdrw5]

I seem to be having and issue with it not posting my tool height offset line on Tap and Reaming cycles but it does on all other cycles(Bore, Drill, Peck Drill) as well as any milling cycles. According to the Debug it seems to be missing the Rapid After Toolchange code constructor. Any ideas.

[MIKEL12]

I usually have G43 together with toolchange, not afterwards in "rapid after toolchange".
The simple explanation is that its not certain that you will rapid after the toolchangi

Example
M6 T4
G43 H4 Z100

[Ecmdrw5]

Duh! Why didn't I think of that, lol. Thanks a lot.

[MIKEL12]

It's easy to get lost in the complication of a simple problem