edgecam help!!!

[dowen]

hi, could anybody help with information on pulling dimensions from a 3d model.
we need to produce stage drawings.
we are using edgecam part modeler.

any information or links to info would be much appriciated.

[meegers]

Open PartModeler - goto Help toolbar and go into tutorials.

Bottom tutorial is 'drafting and detailing a solid model'.

Easy peasy.

[dowen]

thank you v.much,

we are new users to edgecam and have only recieved some pretty basic training. thanks again.

[helix77]

use geometry from edges botton... select the geo you want to dim..or select the whole model..then dimension the 2d geo you need (assuming you are dimensioning on the current cpl)