3 NEW KELING-4030 MICROSTEP DRIVERS

[heilcnc]

THIS KIT CONTAINS 3 NEW: KL- 4030 Microstepping Driver, Heat Sink is included-Features of this driver * Voltage up to 24 to 40VDC, current output up to 3.0 A * Selectable resolutions, 1,1/2, 1/4, 1/8, 1/16, 1/32, 1/64 * Suitable for 4,6,8 lead motors * DIP switch current setting: 0.9A,1.2A,1.5A,1.8A,2.1A,2.4A,2.7A,3.0A * Over voltage, heat and short-circuit protection--------------- 1-NEW:KL-DB25 Breakout Board ------------------ 1-NEW:KL-10-5 5V/2A 110V/220V, 50/60Hz-POWER SUPPLY FOR LOGIC NOT THE STEPPER MOTORS!-------- PLEASE READ THE WHOLE LISTING THERE IS NO POWER SUPPLY FOR THE STEPPER MOTORS----- ONLY 5V FOR LOGIC ! SHIPPING USA ONLY!!!!!!!!!!!!!! YOU CAN GET MORE INFO AND WIRE DIAGRAM ON THIS WEB SITE-- http://www.kelinginc.net/KLDriver.html SHIPPING INTHE USA ONLY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! http://cgi.ebay.com/ws/eBayISAPI.dll...PageName=STRK: BIDING STARTS ST $10
SHIPPING $9.75 FLAT RATE