CHEAP X1 MICRO-MILL SPARE PARTS SET

[kreutz]

Hello;

Just to let you know about this opportunity to buy cheap spares for your Sieg X1 Micro-Mill (Harbor Freight 47158): http://cgi.ebay.com/MICRO-MILL-SPARE...d=p3286.c0.m14.

The complete set of parts offered would cost about $190.00 at LMS not including shipping.

Best regards,

Kreutz.

[kreutz]

Originally Posted by kreutz Hello; Just to let you know about this opportunity to buy cheap spares for your Sieg X1 Micro-Mill (Harbor Freight 47158): http://cgi.ebay.com/MICRO-MILL-SPARE...d=p3286.c0.m14. The complete set of parts offered would cost about $190.00 at LMS not including shipping. Best regards, Kreutz.

Note: The part numbers on the left side of the part's description correspond with the LMS part numbers. Some of the parts on the photo are already assembled (e.g The Z axis finefeed mechanism, the speed selector fork mechanism and the intermediate gears).

[kreutz]

Originally Posted by kreutz Hello; Just to let you know about this opportunity to buy cheap spares for your Sieg X1 Micro-Mill (Harbor Freight 47158): http://cgi.ebay.com/MICRO-MILL-SPARE...d=p3286.c0.m14. The complete set of parts offered would cost about $190.00 at LMS not including shipping. Best regards, Kreutz.

Ebay bidding has ended. I won't renew it. If anyone is interested, please, PM me.

Here is the list of parts included:

2074 BUSHING INTERMEDIATE SHAFT

2075 BUSHING,SHIFTER

2072 BEARING SPINDLE (QTY= 2)

2162 SPACER SPINDLE

2156 SHAFT INTERMEDIATE

2155 SHAFT DOWNFEED

2087 DIAL, Z AXIS FINEFEED

2179 WORM Z AXIS FINEFEED

2178 SHAFT, Z AXIS FINEFEED

2177 WORM GEAR Z AXIS FINEFEED

2174 TOP COVER

2113 KNOB HI-LO SHIFTER

2089 FORK,HI-LO SHIFTER

2092 GEAR

2093 GEAR

2094 GEAR

2095 GEAR

2096 GEAR

2097 GEAR

HOUSING SPINDLE DRIVE

2616 LOCKIING LEVER HEAVY DUTY

2151 SEAT SPRING

2157 SHAFT Z AXIS FINE FEED

2159 SLEEVE DOWNFEED

2161 SPACER, HI-LO SHIFTER

2163 SPACER Z AXIS FINEFEED

2169 SPRING, QUILL

2170 SUPPORT SPINDLE SLEEVE



Best regards,

Kreutz.